Description

• 4 7/8″ inch Diamond Coated Hole Saw Tool – Slightly Smaller Than 5 inches
• Rare Size. Use with standard electric or cordless drillers.

Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Quartz Diamond Coated Circular Saw – Kitchen, Bathroom, Shower, Faucet

High-quality DIY standard diamond drill bit (hole saw). Diamond-coated tip goes through Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, and Stones

• These tools do not have center pilot drills.
• Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
• Shank size is 3/8″ – suitable for all common electric drillers.

Can be used with Handheld or Upright Drills

The diamond particle coating on Drilax hole saws gives superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

The electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry.

Shank size is 3/8 inch – suitable for standard drills. The maximum depth of cut is 1-1/8 inch

Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood – plastic or even cardboard. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with a wet sponge.