Description

2-1/2 Inch Diamond Hole Saw

Clean, Fast, Dustless Drilling for:

• Ceramic and Porcelain Tiles
• Glass Bottles and Fish Tanks
• Marble, Granite, and Quartz Countertops
• Kitchen, Bathroom, and Shower Renovations
• Faucet Installation

High-quality DIY standard 2-1/2 inch diamond hole saw:

Diamond-coated tip goes through Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, and Stones

2-1/2 Inch Diamond Hole Saw Can be used with Handheld or Upright Drills. Standard 3/8 inch shank for standard drills.

The diamond particle coating on Drilax hole saws gives superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

The electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry.

Shank size is 3/8 inch – suitable for standard drills. Maximum depth of cut is 1-1/8 inch

Please visit How to Use Diamond Hole Saws Page for DIY Help.

Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.

EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood – plastic or even cardboard. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with a wet sponge.

For more information about our products please visit our Amazon Store