Description

Drilax 3-1/2 inch Diamond Hole Saw

3-1/2 inch Diamond Hole Saw: High-quality DIY standard diamond drill bit (hole saw). Diamond-coated tip goes through Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, and Stones

Can be used with Handheld or Upright Drills

The diamond particle coating on Drilax hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

The electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry.

Shank size is 3/8 inch – suitable for standard drills. Maximum depth of cut is 1 inch

Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood – plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with a wet sponge.

Tiles;Glass;Fish Tanks;Marble;Granite;Ceramic,Porcelain;Bottles;Stones